Plasma modes
Cold and warm plasma, selectable on the touchscreen.
Luxis Plasma
Luxis Plasma Skin Care System
Cold + warm plasma, 9 dedicated applicators, and face / body / scalp protocols in one main unit.
A touchscreen main unit, two selectable plasma modes, and nine applicators for face, body and scalp work. Training, technical support and partner onboarding come with the product — not as paid extras.
Product overview
The device, the modes and the applicators
The system is designed so a trained practitioner can move between objectives with the same main unit — cleanse, calm, prepare and revitalise — without buying a new device.
Luxis Plasma is a professional plasma skin care system. A touchscreen main unit drives a handpiece and an interchangeable applicator.
Two plasma characters are available. Cold plasma supports surface cleansing, calming and appearance-care work. Warm plasma supports controlled energy-based work on targeted areas.
Facial, targeted, body and scalp work each need a different applicator geometry, so the system ships with nine purpose-designed applicators rather than a single tip.
Applicators
Nine purpose-designed applicators for face, body and scalp.
Coverage
Face, body and scalp protocols in one main unit.
Training and support
Onboarding, remote operation training and partner support included.
System components
What is included
The configuration below describes the platform structure. Exact box contents are confirmed on the commercial quotation for your market.
Main unit
Housing the controls, screen and energy generation.
Handpiece
Held by the practitioner and used to drive the selected applicator.
Applicator set
Interchangeable glass applicators in different profiles.
Mobile cart
Professional cart configuration for treatment-room use.
Accessories
Supporting items required for routine operation and maintenance.
Power and connection
Mains connection for the main unit; regional power variants apply.
Included accessories and consumables vary by model and market. Exact contents will be listed here once confirmed.
Applicators
Nine applicators for nine different geometries
Applicator choice follows the treatment area and the protocol objective. The list below covers the full supplied set.
| Applicator | Recommended area | Intended professional protocol | Mode compatibility | Cleaning / replacement |
|---|---|---|---|---|
| HyperPlasma | Face and scalp | Skin calming, sebum balance, barrier support, texture refinement, enhanced product absorption | Cold plasma (argon required) | 30–35°C argon plasma. Reusable for approximately 8–10 sessions with proper cleaning and disinfection. |
| Scalp Plasma | Scalp and targeted body areas | Scalp revitalization, sebum balance, follicle support, improved hair-serum absorption | Cold plasma (argon required) | 40–45°C argon plasma with a wider contact surface. Reusable for approximately 8–10 sessions with proper cleaning and disinfection. |
| Jet Plasma | Eye, lip and targeted face | Fine lines, active blemishes, localized inflammation, skin purification, targeted facial care | Cold plasma (argon required) | 50–70°C argon plasma; concentrated, needle-free discharge. Reusable for approximately 20–30 sessions with proper cleaning and disinfection. |
| Roller Plasma (Large) | Large treatment areas | Enlarged pores, uneven texture, skin firmness, deeper rejuvenation, enhanced product absorption | Cold plasma (argon required) | 80–140°C argon plasma with short-needle micro-stimulation. Single use per client. |
| Roller Plasma (Small) | Small treatment areas | Enlarged pores, uneven texture, skin firmness, deeper rejuvenation, enhanced product absorption | Cold plasma (argon required) | 80–140°C argon plasma with short-needle micro-stimulation. Single use per client. |
| DermaPlasma | Face and body | Enlarged pores, uneven texture, skin firmness, deeper rejuvenation, enhanced product absorption | Cold plasma (argon required) | 80–140°C argon plasma with short-needle micro-stimulation. Single use per client. |
| Gold Plasma | Targeted facial and body areas | Fine lines, uneven texture, localized skin tightening, firmness, visible rejuvenation | Warm plasma (no gas required) | Precision-needle contact. Reusable with proper cleaning; replace if the needle becomes damaged, bent or worn. |
| Ozone Plasma | Skin and scalp surface | Surface cleansing, sebum balance, skin clarity, revitalization, enhanced product absorption | Warm plasma (no gas required) | Ozone-rich plasma discharge. Reusable with proper cleaning; replace if the tip becomes damaged or worn. |
| Diamond Plasma | Face and body | Skin elasticity, firmness, uneven tone, texture refinement, radiance | Warm plasma (no gas required) | Diamond-shaped contact surface. Reusable with proper cleaning; replace if the tip becomes damaged or worn. |
Applicator names, handpiece photography, recommended area, intended professional protocol, plasma mode and cleaning/replacement guidance are published as confirmed by the manufacturer. Cold-plasma applicators use high-purity argon; the warm-plasma set does not require a gas. Roller Plasma applicators and DermaPlasma are single use per client.
HyperPlasma
Scalp Plasma
Jet Plasma
Roller Plasma (Large)
Roller Plasma (Small)
DermaPlasma
Gold Plasma
Ozone Plasma
Diamond Plasma
Workflows
How a protocol is put together
Each application follows the same shape: assess, prepare, work, finish. The detail changes with the objective and the area.
Facial protocol
Full-face work with a broad applicator, following the contours of the treatment zone.
- 1 Consult and assess the client, then record the plan
- 2 Cleanse and prepare the skin
- 3 Select mode and applicator, confirm settings
- 4 Work across the face in a consistent pattern
- 5 Finish with the appropriate post-protocol care
Targeted protocol
Precision work on a limited area using a point or small-profile applicator.
- 1 Identify the area to be worked on
- 2 Prepare the surrounding skin
- 3 Select the mode suited to the objective
- 4 Work in short, controlled passes
- 5 Record the settings used for the next session
Scalp protocol
Sectioned scalp work with a dedicated scalp applicator.
- 1 Dry, section and part the hair
- 2 Assess the scalp condition visually
- 3 Select the scalp applicator and mode
- 4 Work section by section at a consistent distance
- 5 Finish and return the applicator for cleaning
Workflows are described at the level of practitioner sequence. They intentionally contain no dosing, energy settings or claimed outcomes.
Interface and operation
The system in the treatment room
Photographs of the unit, screen and accessories as supplied for professional presentation.
Demonstrations
Protocol demonstrations
Short vertical clips showing applicator handling and session flow. They are muted by default and play only when selected.
Documentation
Documentation available to qualified partners
Korea Luxis Tech provides product documentation to support professional evaluation and international business discussions. Documentation availability and regulatory status may vary by product model and market.
LVD / EMC verification summary
This document is a voluntary LVD/EMC verification. It does not imply conformity with all essential requirements and it is not a medical-device approval.
Luxis Plasma brochure
Brochure content is intended as product information for professionals and is not a treatment claim.
Operating manual
Operation is restricted to trained professional users.
Regulatory classifications, permitted claims, and market availability vary by country. Contact Korea Luxis Tech for documentation applicable to your market.
Training
Training before the first treatment
Protocol quality depends on the practitioner. Onboarding covers the system, the modes and the applicator set before any client work begins.
System onboarding
Setup, screen navigation and routine care of the unit.
Mode selection
When to use cold plasma and when to use warm plasma.
Applicator handling
Choosing, fitting and cleaning the applicators.
Protocol practice
Guided practice of the movement patterns for each area.
Client consultation
Assessment, contraindication review and expectation setting.
FAQ
Frequently asked questions
What is Luxis Plasma?
Luxis Plasma is a professional plasma skin care system. It generates a controlled plasma discharge at the applicator tip and supports face, body and scalp protocols for trained practitioners.
What is the difference between cold and warm plasma?
Cold plasma is used where the professional objective is surface cleansing, calming and appearance care. Warm plasma is used for controlled energy-based appearance protocols on targeted areas. Both require practitioner training.
Which professional settings is the system designed for?
It is designed for professional beauty and aesthetic environments such as clinics, aesthetic practices and salons that employ trained practitioners. It is not a home-use device.
Which areas can practitioners work on?
Facial, targeted skin, body and scalp areas can be covered with the appropriate applicator. The exact selection depends on the protocol objective and the practitioner’s assessment.
How many applicators are included?
The supplied range includes nine handpiece and glass applicator options. The contents of a specific commercial configuration are confirmed on the quotation.
Is training available?
Yes. Onboarding, online operation training and protocol guidance are part of the partner support programme.
What product documentation is available?
A voluntary LVD/EMC verification summary is available, together with product information material. Availability and regulatory status vary by model and market, so contact us for the documentation relevant to your country.
Can I become a distributor?
We review distributor and importer applications from qualified companies with relevant market experience. Territory terms are agreed in writing after review.
How can I request pricing?
Pricing is provided through a qualified inquiry rather than published on the website. Submit the product information form and our team will follow up with commercial details.
Intended for professional cosmetic use. Regulatory status and permitted claims vary by market.
Next step
Request product information
Tell us which applications matter for your practice or market and we will send the relevant product information, documentation and commercial options.
Pricing is not published on the website. Qualified buyers, clinics and distribution partners receive commercial terms directly from our team.
Send inquiry
Download the brochure
Complete the short form below and the brochure download link will appear immediately.
Your download is ready.
Download the brochure (PDF)